Take a walk around Petaluma Fire Department’s #Enforcer #Pumper! Idle Reduction Technology and #TAK4 Independent Front Suspension are key elements that were implemented in this engine! An electronic hosebed cover increases the safety of their firefighters in their windy area. The rear bumper air dump valve can drop the tailboard by 6 inches. #PetalumaCA Watch the full walk around on our YouTube channel! | Pierce Mfg
0:59
Take a walk around Petaluma Fire Department’s #Enforcer #Pumper…
76.2K viewsNov 20, 2023
FacebookPierce Mfg
A double delivery for the Hopkinton Fire Department - a set of #Enforcer #Pumpers! 🚒🚒 The Enforcer™ chassis establishes uniformity of layout and controls within their fleet. By working closely with Allegiance Fire & Rescue and Pierce engineers they were able to maximize compartment spaces, design 750-gallon water tanks and lower the hosebeds to the lowest heights. Located in the dunnage areas, they customized spaces for recessed 100-foot booster lines to keep the overall heights of each engine
1:00
A double delivery for the Hopkinton Fire Department - a set of #Enforc…
24.7K viewsFeb 19, 2024
FacebookPierce Mfg
Walk around the Harborcreek Volunteer Fire Department’s #Enforcer #Pumper with Fire Chief Charles Ramsey. Going through the 1000-gallon tank with a central storage compartment for ground ladders and pike pole allowed for full depth compartments all around the truck. Stainless steel hydraulic hose bed covers protect the 200 feet of tank line and 400 feet of supply hose in the bed and provide allow for access to all equipment. #EriePA CHASSIS Chassis: Enforcer 84” cab with 10” raised roof Seating
6:47
Walk around the Harborcreek Volunteer Fire Department’s #Enf…
5.3K viewsNov 17, 2020
FacebookPierce Mfg
Walk around Burnet County ESD Spicewood Fire Rescue’s first brand new apparatus, an #Enforcer #Pumper! On their first custom engine, they selected a new, lighter shade of red and designed a new logo for their department. The ladder storage runs through the center of the water tank to keep all compartments at full depth. To limit contaminates in the cab, they will be storing their SCBAs in body compartments. There are many large homes in #SpicewoodTX, so they selected a large pump and tank. Due t
2:25
Walk around Burnet County ESD Spicewood Fire Rescue’s first bra…
2.6K viewsApr 14, 2023
FacebookPierce Mfg
✌️ #Enforcer #Pumpers for Gloucester Fire Department! The front bumper of their engines feature a California notch for a low-profile design permitting clearance for their soft suction hoses and preconnects on the driver’s sides. To increase firefighter safety, the insides of the doors display stop signs and directional markers. Strategically placed lights are included in the design of each apparatus to increase visibility in the poorly lit areas of #GloucesterMA. Watch the full walk around here:
0:56
✌️ #Enforcer #Pumpers for Gloucester Fire Department! The f…
22.8K viewsFeb 11, 2025
FacebookPierce Mfg
A triple delivery for Albuquerque Fire Rescue! Their trio of #Enforcer #Pumpers follow a consistent engine design while introducing new attributes. They are welcoming the Enforcer custom chassis to their fleet with a clean cab concept which supports cancer prevention efforts. This specific engine will be located at Station No.7 and will tend to approximately 3,500 calls a year. A hard suction hose will be stored on top of the engine for drafting operations in their wildland division. Their depar
0:58
A triple delivery for Albuquerque Fire Rescue! Their trio of #Enforc…
17.3K viewsMar 25, 2024
FacebookPierce Mfg
This #Enforcer Heavy-Duty #ResucePumper offers up to 500 cubic feet of storage space with 800-lbs of carrying capacity. On the rear, fully transverse side compartments offer an expansive storage configuration. See it this summer on the 2025 Pierce Road Rally! Watch the full walk around: https://youtu.be/22tTOUyUMkk | Pierce Mfg
2:28
This #Enforcer Heavy-Duty #ResucePumper offers up to 500 …
4.5K views11 months ago
FacebookPierce Mfg
Take a walk around the #Enforcer 75’ aluminum #AerialLadder with Tom Smits. The 22” front bumper extension has a trash line, accommodating up to 100’ of 1.75” hose. The Enforcer chassis features the single bonded windshield and the low access step heights. You have the capability to add up to two more seats in the crew cab or EMS compartments. There’s a dunnage area above the pump that can house loose equipment. The body has full height, full depth compartments with adjustable shelving. The spli
4:46
Take a walk around the #Enforcer 75’ aluminum #AerialLadder with …
21.9K viewsApr 16, 2019
FacebookPierce Mfg
Join Tony Johnson of the City of Huntington Fire Department, IN as he walks around their #Enforcer #Pumper equipped with a #PUCPump on the #FDIC2021 show floor. The 5-person cab has an open concept with the controls up and out of the way. The screen on the pump panel displays a camera feed from the officer’s side of the truck so the pump operator has full visibility of the scene. The deck gun can be operated at the pump panel, or by remote, so no one needs to be on top of the truck – increasing
2:46
Join Tony Johnson of the City of Huntington Fire Department, IN a…
5.7K viewsAug 6, 2021
FacebookPierce Mfg
This #Enforcer Heavy-Duty #RescuePumper features a re-designed side control pump house with speedlays. This new integrated speedlay design provides a shorter overall wheelbase and improved maintenance access while maintaining the familiar control zone pump panel layout and variety of fire suppression options. ⁠ ⁠ CHASSIS⁠ Chassis: 70” Enforcer with a 10” raised roof⁠ Seating Capacity: 6⁠ Overall Height: 9’9⁠ Overall Length: 34’⁠ GVW Raring: 46,500 lb ⁠ Safety: Side Roll and Frontal Impact Protec
6:09
This #Enforcer Heavy-Duty #RescuePumper features a re-des…
14.8K viewsApr 13, 2021
FacebookPierce Mfg
Walk around Kearney Volunteer Fire Department’s #Enforcer #Pumper with Deputy Fire Chief Jason Whalen. The #Husky12 Foam System uses patented flow meter-based technology and is highly accurate over a wide range of pressures from 75 psi to 250 psi. The vinyl seating makes for easy clean up, and the backlit handles and steps offer safer maneuverability at night. The crosslays have quick release nets to quickly get what is needed. The retractable cord reels above the pump panel save on clean up tim
7:23
Walk around Kearney Volunteer Fire Department’s #Enforcer #Pumper …
11.5K viewsAug 9, 2021
FacebookPierce Mfg
Walk around New Bremen German Township Fire Department’s newest addition to their fleet, an #Enforcer #Pumper! On the front bumper of the engine, they included a front inlet suction for their rural district to ease water movement and supply. A top mounted pump panel allows the pump operator maximum visibility on the fire scene. They selected to mount a light tower above the crew cab. The rear of the engine features a graphic of the Fallen Firefighter’s Memorial. A hydraulic ladder rack system wa
2:56
Walk around New Bremen German Township Fire Department’s newe…
2.6K viewsApr 19, 2023
FacebookPierce Mfg
Live Oak Fire Department’s #Enforcer 100’ #AscendantTower is operating live during the #eclipse! 🌕🌑#firefighter #firetok #firetruck #piercemfg #LiveOakTX #AscendantPlatform #AerialPlatform #MidMountPlatform #solareclipse | Pierce Mfg
0:07
Live Oak Fire Department’s #Enforcer 100’ #AscendantTower i…
7.4K viewsApr 8, 2024
FacebookPierce Mfg
Take a walk around Taylor Fire Rescue’s #Enforcer #Pumper with Chief Byford. One reason this chassis was chosen was to be ergonomically friendly getting in and out of the cab. Being a paid on-call department, this rig allows for flexibility while transitioning through calls. Having a top-mount enclosed pump panel allows the engineer to work inside due to the cold climate of #TaylorBC. To maximize space on the apparatus, the department went with full depth compartments and slide-out drawers to al
15:02
Take a walk around Taylor Fire Rescue’s #Enforcer #Pumper wit…
32.7K viewsFeb 5, 2020
FacebookPierce Mfg
This black over orange #Enforcer #Pumper is headed to #AndrewsTX! Introducing a new color scheme for Andrews Fire Rescue, additional lighting was added for safety and increased visibility on scene. A chevron pattern was placed on the rear, inside crew cab doors and at the rear of the chassis for safety. Their engine offers maximum storage for equipment and gear. Between the cab doors an EMS compartment is accessible from both the outside and inside the cab. Chassis: 70” Enforcer cab with 10” rai
7:50
This black over orange #Enforcer #Pumper is headed to #AndrewsT…
7.5K viewsFeb 8, 2023
FacebookPierce Mfg
Arlington County Fire Department was traditionally an #ArrowXT chassis fleet but has recently transitioned over to the #Enforcer chassis for their four new #Pumpers. They chose to make the switch due to the availability of heavy-duty 13.38” frame rails and a metal dash and rear HVAC plenum cover. Each #Pumper includes an EMS cabinet for storage of ALS equipment and a cabinet on the doghouse to hold ballistic vests. The pump panel valves and intakes are all manual for simplicity. The hosebed at t
6:16
Arlington County Fire Department was traditionally an #ArrowXT cha…
12.7K viewsOct 11, 2022
FacebookPierce Mfg
Storage and lighting were key components when Fort Smith Fire Department designed their #Enforcer #Pumper. Here is a quick look at the apparatus! 👀 Overall Height: 9’ 11”⁠ Overall Length: 31’ 7”⁠ Pump: Waterous, 1,500 gpm⁠ Tank: 500-gallon⁠ Foam:#Husky3 Foam Cell: 30-gallon⁠ Job Number: 40725 Dealership: Siddons-Martin Emergency Group | Pierce Mfg
0:55
Storage and lighting were key components when Fort Smith Fir…
7.4K viewsFeb 3, 2025
FacebookPierce Mfg
Walk around one of two identical #Enforcer #Pumpers from Lakewood Fire District with Fire Chief Jonathan Yahr. The department chose to raise the pump house and updated to hand wheel controls on these trucks. Shoreline outlets in each compartment allow them to run tools without a generator. The low hose bed will allow firefighters to reach hose lines easily and safely. Serving an urban community, the short wheelbase allows the department to maneuver tight streets throughout the city. Line-X coati
6:26
Walk around one of two identical #Enforcer #Pumpers from Lakewo…
32.7K viewsMar 31, 2021
FacebookPierce Mfg
Walk around this #Enforcer #Pumper with Jason Gillespie, Captain of the Resource Management Division for Chesterfield County Fire and EMS! 🟡🔵 The department incorporated a clean cab concept by including compartmentation outside the cab for turnout gear. The compact #PUCpump allows for low, ergonomic-crosslays and longer ladder storage. Designed to drape hose over the top of it, they configured a hanger-inside the rear passenger compartment. Allowing for more secure in cab storage, between the
4:36
Walk around this #Enforcer #Pumper with Jason Gillespie, Ca…
5.7K viewsSep 29, 2021
FacebookPierce Mfg
This #Enforcer Top Mount Control #PUCPump #Pumper features a redesigned pump panel area, adding a transverse walkway allowing firefighters to operate from an elevated position, while maintaining the traditional features of simple operation, safety, serviceability and maneuverability. Features include: ✅ 14” elevated platform for improved scene visibility ✅ Easy access swing down aerial style steps ✅ Maintains the current PUC crosslay options ✅ Left side front compartment for increased storage ✅
1:00
This #Enforcer Top Mount Control #PUCPump #Pumper features a re…
18.5K views11 months ago
FacebookPierce Mfg
The Pierce Ultimate Configuration is better than ever, offering enhanced flow capabilities of up to 2000 gallons per minute, and a rugged pump drive system! Purpose Built. No compromises. Perform. Like No Other. | Pierce Mfg
2:13
The Pierce Ultimate Configuration is better than ever, offering enhance…
242K viewsApr 23, 2022
FacebookPierce Mfg
Mississauga Fire and Emergency Services #Enforcer #Pumper features Blue Sea fuse blocks throughout the cab for installation of new devices that require charging. Each compartment has peg boards to easily mount tools. The rear of the apparatus has a half drop-down, half roll-up door for quick, easy accessibility. #MississaugaON CHASSIS Chassis: 70” Enforcer cab with 10” raised roof Seating capacity: 5 Overall height: 10’ 4” Overall length: 32’ 5.25” GVW Rating: 47,000 lb Front axle: Meritor MFS-2
3:47
Mississauga Fire and Emergency Services #Enforcer #Pumper featu…
27.7K viewsApr 13, 2019
FacebookPierce Mfg
Walk Around Central Mat-Su Fire Department’s new #Enforcer #PumperTanker with Assistant Chief Jake Boothby. The body style was chosen, with additional compartment space in the crew cab, due to their rural service area with longer response times. To save space, a rear snap tank was added. Front bumper mounted turrets allow pump-and-roll capabilities. With the darkness in #WasillaAK, each emergency light has a scene light underneath it to providing additional lighting. CHASSIS Chassis: 70” Enforce
6:04
Walk Around Central Mat-Su Fire Department’s new #Enforcer #Pu…
15.1K viewsJun 10, 2021
FacebookPierce Mfg
Frederick County chose the #Enforcer chassis for its interior space, easily adjustable seats, and single piece windshield. The department also added a mounting plate across the engine tunnel for equipment. This 750-gallon #Pumper has a short wheel base of 180” for better maneuverability, traditional lap doors for better functionality, a low profile hosebed, and partial solid hosebed cover to protect the hose. #FrederickCountyMD CHASSIS Chassis: 70” Enforcer cab Seating Capacity: 6 Overall Height
8:09
Frederick County chose the #Enforcer chassis for its interior s…
17.8K viewsMay 17, 2018
FacebookPierce Mfg
The City of Lake Geneva Fire Department’s #Enforcer #PumperTanker features a front bumper which will hold 400’ of two-inch preconnected hose along with various tools. An enclosed top-mounted pump panel was chosen to keep engineers out of the elements when operating, while a large viewing window in the back provides better visibility. Crosslays behind the pump panel include slide out trays for easy of loading. The crew cab includes a cabinet for paramedic gear. #LakeGenevaWI is about 10 square mi
6:42
The City of Lake Geneva Fire Department’s #Enforcer #Pumper…
9K viewsDec 19, 2022
FacebookPierce Mfg
Our Ten-8 Pierce Mfg Stock #Enforcer #pumper will be on display at our Forsyth Grand Opening Thursday, May 16th. The vehicle is loaded with: Chassis: Enforcer Engine: Paccar Engine Company MX13, 510 hp HiViz LED Lighting Connect Warning System Seating for Six Pierce Command Zone Pump: Waterous CSU, 1500 GPM Tank: 1000 gallons Foam: 20 gallons The Forsyth Refurbishment Service Center is located at 1739 Collier Road, Forsyth, GA. | Ten-8 Fire & Safety
0:44
Our Ten-8 Pierce Mfg Stock #Enforcer #pumper will be on disp…
2K viewsMay 13, 2024
FacebookTen-8 Fire & Safety
🔥FOR SALE🔥 🚒 Beautiful 2004 Pierce Enforcer 1500/750 Rescue Pumper for $109K 🔗Schedule a live video tour or learn more: https://firedept.link/3LAQPU4 ✅ 50,500 miles and 7,900 engine hours ✅ Powered by a 330HP 8.7L Detroit Diesel Series 40 Engine ✅ 1500 GPM single-stage Hale QMAX pump with around-the-pump foam system #usedfiretruck #usedfiretrucks #firetrucksforsale #firetruckforsale #usedfiretruckforsale #rescuepumper #rescuepumperforsale | Command Fire Apparatus LLC - Used Fire Trucks
2:48
🔥FOR SALE🔥 🚒 Beautiful 2004 Pierce Enforcer 1500/750 Rescue Pumpe…
2K viewsJul 28, 2024
FacebookCommand Fire Apparatus LLC - Used Fire Trucks
PUC™ | Pierce Ultimate Configuration | Pierce Mfg
2:53
PUC™ | Pierce Ultimate Configuration | Pierce Mfg
11 months ago
piercemfg.com
Walk around this #Enforcer #Pumper, with Minas Klikas, lieutenant, Des Plaines Fire Department. The apparatus is equipped with #TAK4 Independent Front Suspension to help with tight corners. The apparatus was designed to have a longer wheelbase which measures to be 234 inches. The grab rails are recessed for driver’s safety when grabbing. The truck implemented a squad-based type cab which utilizes space for dive, hazmat, firefighter suppression and ALS equipment. The #PUCPump was chosen because i
6:59
Walk around this #Enforcer #Pumper, with Minas Klikas, lieute…
41.7K viewsSep 9, 2021
FacebookPierce Mfg
Built on the popular Pierce Enforcer cab, Pflugerville Fire Department's new Engine 221 features a 1000 gallon water tank and 50 gallon foam cell with the Pierce PUC 1500 GPM pump, Husky 3 foam system, and Hercules CAFS. Other features include a Detroit Diesel DD13 505hp engine, TAK-4 independent front suspension, custom Pierce Enforcer cab with seating for six personnel, a standout 19" front bumper extension with chevron, mounted rear booster reel, rear access ladder for upper body compartments
3:07
Built on the popular Pierce Enforcer cab, Pflugerville Fire Department'…
1.3K viewsApr 19, 2018
FacebookSiddons-Martin Emergency Group
See more